AUDIX DN43

The DN43 microphone interface is a key part of the Audix Dante system. AES67 integrated microphone system, the fastest and most seamless way to deliver renowned Audix audio performance over Ethernet networks. High-quality audio and all microphone functions, including turning on and off and LED status indicators, are available via a single CAT5 - CAT7 cable with RJ45 connections on both the interface and the microphone. This extremely simple configuration eliminates soldering failures, wiring errors, speeds up installation and significantly reduces costs. The DN43 features an RJ45 microphone input designed specifically for the Audix M3 three-element pickup microphone and an input for single-element pickup microphones, both equipped with Audix RJ45 output. It also has two 5 V logic outputs per port, with source/collector capacity for DSP controlled LEDs connected to the network. High-pass and low-pass filter settings are available on each audio channel, as well as eight selectable gain levels, with all settings configurable via software.

Technical features:

24-bit 48 kHz high-fidelity

audio

.

Balanced audio inputs with RFI interference filter.

48V phantom output.

Each channel has selectable preamp gain and high pass and low pass filters

.

All channels independently controlled.

Flash memory prevents loss of configurations in the event of a power failure.

Compatible with the M3 three-element microphone (DN43 only), the M70WD adjustable ceiling microphone and the M55WD ceiling microphone.

48V or PoE power supply. Power supplies not included

.