Celestion CDX14-3060 75W 8ohm HF Ferrite

Celestion - CDX14-3060 75W 8ohm - HF Compression Driver - Ferrite Compression Driver with ferrite



magnet, 1.4 output, 75Watt power, 8ohm impedance, titanium diaphragm, screw fixing (bolt).

Features



- 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity

- Patented phase plug design method suppresses cavity resonances at higher frequencies -
Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
-
Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
- Rolled polyimide surround improves stiffness control, further lowering distortion - Curved

coherent wavefront, optimised for horn loading

General Specifications Power rating (1): 75Wrms
Continuous power rating (2): 150W
Nominal impedance: 8ohm
Frequency range: 500-18000
Sensitivity (3): 106.5dB
Recommended min. crossover (12dB/Oct): 1000Hz 12dB/Oct
Voice coil diameter: 75mm/3in Voice coil material: Edgewound Copper Clad Aluminium Magnet type: Ferrite Diaphragm material: Titanium Surround material: Polyimide

Mounting Information

Width: 180mm/7.0in

Depth: 71mm/2.8in

Weight: 4.88kg

Fitting: Flange (4 x M6 holes on a 102mm/4in PCD)

Throat exit: 35.6mm/1.4in

Note

(1) Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.

(2) Continuous Power Handling is defined as 3dB greater than the AES rating.

(3) Measured on axis at 1W, 1m, using typical horn, in 2 anechoic environments.

To print the product sheet, click here For an overview of the entire Celestion CDX Ferrite series, click here To consult and download the original Celestion Pro Audio brochure, click here "Celestion

-

CDX14-3060 75W 8ohm - HF Compression Driver - Ferrite

Compression Driver with ferrite magnet, 1.4 output, 75Watt power, 8ohm impedance, titanium diaphragm, screw fixing (bolt).

Features



- 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity

- Patented phase plug design method suppresses cavity resonances at higher frequencies -
Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
-
Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
- Rolled polyimide surround improves stiffness control, further lowering distortion - Curved

coherent wavefront, optimised for horn loading

General Specifications Power rating (1): 75Wrms
Continuous power rating (2): 150W
Nominal impedance: 8ohm
Frequency range: 500-18000
Sensitivity (3): 106.5dB
Recommended min. crossover (12dB/Oct): 1000Hz 12dB/Oct
Voice coil diameter: 75mm/3in Voice coil material: Edgewound Copper Clad Aluminium Magnet type: Ferrite Diaphragm material: Titanium Surround material: Polyimide

Mounting Information

Width: 180mm/7.0in

Depth: 71mm/2.8in

Weight: 4.88kg

Fitting: Flange (4 x M6 holes on a 102mm/4in PCD)

Throat exit: 35.6mm/1.4in

Note

(1) Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.

(2) Continuous Power Handling is defined as 3dB greater than the AES rating.

(3) Measured on axis at 1W, 1m, using typical horn, in 2 anechoic environments.

To print the product sheet, click here For an overview of the entire Celestion CDX Ferrite series, click here To consult and download the original Celestion Pro Audio brochure

, click here”