Celestion - Bass Ferrite Pulse10 10 200W 8ohm With its sturdy steel chassis, the Pulse10 is a bass speaker that, despite its 10", guarantees solid and full-bodied bass both alone and in a 4x10" or even 8x10" cabinet. Expect a defined, full-bodied low-end with warm, present mids. Celestion Pulse: bass to 'hear' as well as listen to.
General Specifications Nominal diameter: 10", 254mm Power rating: 200W Nominal impedance: 8ohm Sensitivity: 94dB Magnet type: Ferrite Voice coil diameter: 2", 50.8mm Coil material: Copper Cone material: Kevlar loaded paper Former material: Polyimide Surround material: Cloth-sealed Frequency range: 45-3500Hz Xmax: 0.15", 4mm Gap depth: 0.31", 8mm Voice coil winding width: 0.62", 16mm Thiele-Small parameters
D: 0.21m/8.3in
Fs: 68Hz
Mms: 32.9g/1.16oz
Qms: 2.54
Qes: 0.53 Mmd: 29.26g/1.03oz Qts: 0.44 Re: 6.03L Gas: 25.8lt/0.91cu.ft.
BI: 12.88Tm Cms: 0.15mm/N Rms: 5.79kg/s Le (at 1kHz): 0.92mH Assembly Information Cut-out diameter: 9", 229mm Diameter: 10.1", 256mm Mounting slot dimensions: 0.24x0.31", 6x8mm Mounting slot PCD: 9.6", 245mm Number of mounting slots: 4 Overall depth: 4.3", 110mm Unit weight: 6.6lb, 3kg To print the product sheet, click here For
a
overview of the entire
Celestion Bass Ferrite series, click here To consult and download the original
Celestion Guitar&Bass brochure, click here "Celestion - Bass Ferrite Pulse10 10 200W 8ohm With its sturdy steel chassis, the Pulse10 is a bass speaker that despite the 10"
guarantees solid and full-bodied bass both alone and in 4x10" or even 8x10" cabinets. Expect a defined, full-bodied low-end with warm, present mids. Celestion Pulse: bass to 'hear' as well as listen to.
General Specifications Nominal diameter: 10", 254mm Power rating: 200W Nominal impedance: 8ohm Sensitivity: 94dB Magnet type: Ferrite Voice coil diameter: 2", 50.8mm Coil material: Copper Cone material: Kevlar loaded paper Former material: Polyimide Surround material: Cloth-sealed Frequency range: 45-3500Hz Xmax: 0.15", 4mm Gap depth: 0.31", 8mm Voice coil winding width: 0.62", 16mm Thiele-Small parameters
D: 0.21m/8.3in
Fs: 68Hz
Mms: 32.9g/1.16oz
Qms: 2.54
Qes: 0.53 Mmd: 29.26g/1.03oz Qts: 0.44 Re: 6.03L Gas: 25.8lt/0.91cu.ft.
BI: 12.88Tm Cms: 0.15mm/N Rms: 5.79kg/s Le (at 1kHz): 0.92mH Assembly Information Cut-out diameter: 9", 229mm Diameter: 10.1", 256mm Mounting slot dimensions: 0.24x0.31", 6x8mm Mounting slot PCD: 9.6", 245mm Number of mounting slots: 4 Overall depth: 4.3", 110mm Unit weight: 6.6lb, 3kg To print the product sheet, click here For
a
overview of the entire Celestion Bass Ferrite series, click here To consult and download the original Celestion Guitar&Bass brochure, click here”
Italiano
English
Deutsch
Français
