RME PRO LINE ARC USB Advanced Remote Control Black Edition

USB Advanced Remote Control for FireFace 802AE/UFX II/UFX+ - Black version The Advanced Remote Control (ARC) has been designed to have direct access to the most used actions and commands, and makes everyday work with RME interfaces easier and faster. The configuration is very simple and takes place inside the TotalMix FX. The ARC has a robust metal chassis with a main encoder, 2 buttons and 6 buttons with LEDs. The Remote Control is connected to the audio interface through a 5m cable and a special connector on the back panel of the cards. On the top panel of the ARC there is a rotary encoder with a button function, 2 lower buttons and 6 upper buttons with status LEDs. The rotary encoder can be used to change various parameters such as gain and volume. The left Prog button is programmable, and can perform different functions. The same applies to the 6 buttons that also have an LED that indicates the current state. The ARC provides factory settings for the 7 programmable buttons, but can be configured as desired from the TotalMix FX Key Commands window. The behavior of each button (push, toggle, activate and deactivate) varies depending on the selected function. Available commands/actions (examples) :- Main Volume- Global Mute- Global Solo- Mute Group 1 to 4- Solo Group 1 to 4- Fader Group 1 to 4- Link Main AB- Speaker B Select- DIM (Main Out) - Mute (Main Out) - Mute (Main Out) - Mute FX (Main Out) - Mono (Main Out) - External Input- Reverb- Echo- Cue Phones 1 to 4- Snapshot 1 to 8- Mic Gains- Inst. Gains- Volume PhonesYou can also activate several functions at the same time. Example: The A button has the Cue Phones 1 function set. This means that when pressed, you can hear the headphone submix through the Main output (the monitors). Now in order to change the volume of the headphone submix, assign the Volume Phones 1 function to the B button. By pressing both buttons you can listen to the headphone submix in the monitor output, and change its volume (the fader of the third row) by rotating the encoder. When the Fireface UCX and UFX are used in stand-alone mode, the TotalMix FX on the computer is no longer available, and therefore neither are the ARC configuration settings. In this case, a series of fixed functions are activated: - Encoder rotation: Main Out volume- Encoder pressure: Dim for Main Out- Recall button: Recall function for Main Out- Prog: no function- Buttons from A to F: load Setup from 1 to 6* Note: Advanced Remote Control (ARC) is compatible with all Fireface UCX, and with Fireface UFX that have serial number 23241707 (built after June 2011) or higher. All interfaces with an Advanced Remote Control connection produced from now on will be compatible. Those who own a Fireface UFX with a serial number lower than 23241707 can contact MidiWare to request a hardware update of their interface for full compatibility with Advanced Remote Control. This change is not free of charge.