WARM AUDIO Warm Bender

Bender Tone-style selectable Three-Circuit Fuzz Pedal The Warm Audio Warm Bender features three dedicated, selectable circuits that precisely reproduce two of the most iconic shades of fuzz Tone Bender, as well as an extra modern circuit. You can choose between a NOS 76 configuration for a sharp and present sound, or a NOS 75 configuration to achieve the tone of the Mark II Professional-style Bender fuzz, or a proprietary circuit with a 3-transistor topology for a more modern view of this legendary variety of fuzz. The Warm Bender is made from 100% through-Hole components and uses NOS germanium transistors. Inside the Warm Bender, you'll find two distinct germanium fuzz circuits and a third modern silicon circuit, offering a softer, distortion-like tone. With the additional SAG control that adjusts the tension and the small size of the pedal, the Warm Bender represents the definitive fuzz Bender experience. Three Selectable Circuits: For a rich, responsive and aggressive fuzz, take advantage of the authentic sound of not one, but TWO of the most iconic British Tone Bender fuzz pedals that have conquered the United Kingdom. Like the original vintage two-transistor and three-transistor pedals, Warm Bender offers all the wild and uncontrolled tones that have made this style of fuzz famous. In addition, Warm Bender features a third bonus circuit that uses silicon transistors in the three-transistor topology, for a more modern view of this legendary type of fuzz. Classic Tone Bender style two-knob controls: Warm Bender has the classic 'Level' and 'Attachment' controls of NOS 75 & NOS 76 Tone Bender style pedals. “Level” adjusts the pedal output volume, adjusting the overall volume of the effect. The Attack control determines the distortion/sustain level of the fuzz. Additional controls include a “Version” rotary switch to choose the distinctive all-analog bender-style circuit and a rear-mounted SAG switch to deprive the pedal of tension. NOS Germanium Transistor: The first two positions on Warm Bender use NOS germanium transistors to authentically reproduce the intricate tones and separate circuits of vintage Tone Bender fuzz pedals. Position #1 is a two-transistor fuzz with an OC76 NOS transistor paired with an SFT337 NOS. Position #2 is a three-transistor fuzz with (3X) NOS OC75 transistors. Every transistor on Warm Bender is hand tested with tight tolerances for consistent performance. NOS 76 setting - Cut Through the Mix: This two-transistor OC76-based fuzz boasts impactful tones that stand out in the mix. Like the original silver and black fuzz Tone Bender, the NOS 76 setting on Warm Bender offers aggressive fuzz with very strong grit and attack. NOS 75 Setting - Get the Heat and Fuzz: Compared to the NOS 76 setting, the NOS 75 setting on Warm Bender provides the user with impressive bass sounds with soft, velvety fuzz tones. Like the original three-transistor British fuzz pedal, based on Professional MKII/OC75, the NOS 75 setting on Warm Bender reveals a saturated, round, “darker” sound reminiscent of the most famous British fuzz pedals. Silicon Setup — Modern, Controlled Chaos: The Silicon setting on Warm Bender takes the three-transistor topology similar to the NOS 75 setting, but replaces germanium transistors with modern silicon components. This setting acts as a bridge between traditional Tone Bender fuzz and a more modern distortion-like tone, offering smoother sustain, natural compression, and fuzz that goes well with the mix.Starved-Circuit Tone Experience with SAG: The SAG switch on Warm Bender recreates the special and unique sound of the original Tone Bender style fuzz pedals when the batteries were low or the current was low. These shades are extremely sensitive to touch, especially when you lower the volume. The playing experience is similar to tweed/mid-gain amplifiers pushed beyond the limit.Hand Tested in Austin, TX: Like all Warm Audio instruments, the Warm Bender has been meticulously hand tested and inspected by experienced technicians with a passion for music in Austin, TX, USA.Technical Specifications: Three selectable circuits, NOS Transistor Bender-Style Fuzz Pedals, precisely recreate two of the most iconic Tone Bender Fuzz Pedals + a modern bonus circuitPremium components, including all NOS germanium transistors: (1X) OC76, (1X) SFX) T337 and (3X) OC 75. Controls: Level, Attack, Version, SAG 100% Through-hole ConstructionTrue-Bypass Switching9 Volt Battery or External DC Adapter Regulated to 9V (center-negative) Current Consumption: 6 mA (9V) Custom Case with a Hammered Metallic Powder Finish1/4” Input and Output Jack Dimensions: 15.2 x 5.7 x 8.9 cmWeight: 0.6 kg More frequent uses• Directly in clean amplifiers with volume turned down for an amplifier-like tone pushed over the limit• In front of OD/Boost for riff Saturated solos• Unrestrained Gain for get amplifier feedback and microphone noise from the PickupArtists who used it• Jimmy Page• Jeff Beck• Pete Townshend• Mick Ronson• Dave Davies• Marc Bolan