With the Shure A95U impedance adapter, you optimize the performance of your dynamic microphones. You can adapt high impedance microphones to low impedance inputs and vice versa. A compact alternative to traditional DIs, allowing you to extend the cable path without loss in level or interference on the frequency spectrum of the audio signal

Reversible impedance adapter for microphones, completely magnetically shielded, that allows you to adapt high impedance microphones to low impedance inputs and vice versa. The Shure A95U looks like an adapter equipped with a 3-pin male XLR connector on the low impedance end which on the other end, for the high impedance end, has an Amphenol MC1M connector to which you can screw the supplied standard ¼” female jack or male jack. Out of the box, A95U comes with the low impedance output set to work with microphones or inputs between 75 and 300 Ohms. To operate with microphones or inputs between 19 and 75 Ohms, simply modify the internal solders of the pins on the XLR connector as indicated

You can use this transformer to extend the efficiency of audio transmission when you use very long cables to connect high or low impedance microphones. If you use it with high impedance microphones, you will have to limit the length of the cable from the microphone to the Shure A95U to a maximum of 4.6 meters, while the cable that goes from the adapter output to the low impedance input of your listening system (mixer, amplified speaker,

With the Shure A95U transformer, you prevent the decay of your microphone's audio performance. You will maintain a signal consistent with the one transmitted, respectful of high frequencies, the signal level and you will increase rejection against unwanted noises, hum and other

The Shure A95U represents an excellent alternative to many of the classic “box” DI microphones, as it is extremely compact, like an XLR/jack adapter. In addition to traditional applications, this accessory will also be very useful for those who use vintage microphones with modern audio equipment and for those who need to connect consumer performance microphones to professional systems

Shure A95U specifications

Dimensions: diameter 19mm, length 89mm with adapter Frequency
response: from 20Hz to 20kHz