The SHURE MOVEMIC TWO RECEIVER KIT includes 2 Bluetooth 5.0 wireless lavalier microphones, the charging case and the MOVEMIC RECEIVER for recording on iOS and Android smartphones and tablets, PC and Mac computers, cameras and camcorders. The frequency response from 50 Hz to 20 kHz ensures professional audio quality. The ultra-light design and the weight of only 8.2 grams per microphone make it ideal for those who create content on the road

The perfect integration with the SHURE MOTIV Audio and MOTIV Video apps will allow you to record and produce your content in an extremely intuitive and fast way. Included is a charging case for a total battery life of about 24 hours. The MOVEMIC receiver included in the kit can be conveniently installed on the slide (hot shoe) of

MOVEMIC TWO COMPACT AND PORTABLE

MOVEMIC are miniature wireless microphones designed to be practically invisible when shooting, thanks to the dimensions of 46 x 22mm per microphone. The IPX4 degree of protection (resistant to splashes of water) allows it to be used even in the rain

24 HOURS OF RECORDING WITH MOVEMIC

With a battery life of 8 hours and an additional 2 recharges inside the included case, content creators will have the opportunity to record for an entire day. Thanks to the USB-C connection, Shure MOVEMIC is universally

EXCEPTIONAL AUDIO QUALITY ON YOUR SMARTPHONE

By using the free Shure MOTIVE Audio and MOTIVE Video applications, you can customize the sound footprint of your MOVEMIC microphones, in order to obtain an excellent recording. The range of action of the microphone is about 30 meters.

VERY FAST CONNECTION AND SETUP

MOVEMIC microphones pair easily to the phone or to the MOVEMIC camera/camera receiver and automatically reconnect to the last paired device once removed from the charging case, significantly reducing setup time

FULL CONTROL THROUGH APPS The

MOVEMIC was designed to be combined with Shure's free MOTIV Audio and MOTIV Video apps. You can configure settings such as gain, limiter, compression, noise reduction and customize the audio through an equalizer. Through the MOTIV Video app, you can record and stream directly to livestream

MOVEMIC RECEIVER FOR CAMERAS

The MOVEMIC RECEIVER, thanks to its small dimensions of 65x67x19 mm and a weight of 81 grams, is light and pocket-sized. The receiver allows both recording and streaming, compatibility with third-party cameras, computers, and mobile applications. From the receiver display, you can rename the microphones and check the battery status. It is possible to connect the receiver to your camera using the slide mount (hot shoe): it will be quick and easy. The connection to the various devices is via the USB-C cable or 3.5 mm cable included in the kit, or by purchasing a separate USB-C to Lightning cable if you want to connect the MoveMic receiver to an iOS device.

Included in the box MOVEMIC RECEIVER KIT 2 MoveMic

• bluetooth lavalier microphones
• Charging case
1 receiver for MoveMic


• 2
USB-C to USB-C cables 1


• 3.5 mm cable


• 1 travel/protective case

Features MOVEMIC TWO RECEIVER KIT

• Frequency response: 50 - 20 kHz +/- 1 dB
• Dynamic range: 100 dB



• Equivalent input noise (from telephone): 26 dB SPL Equivalent


• noise (camera output = line level): 31 dB SPL


• Maximum sound pressure level (SPL): 130 dB SPL


• Sensitivity when used with MV-LAV (Mic Gain = 0): -45 dBV FS @94 db SPL (1 Pascal RMS)
Bit
• depth: 24 bit Sample rate:
• 48 kHz or 44.1 kHz (depending on the device used) Integrated USB-C audio interface: 2 in/2
out




• Gain adjustment range: 0 — 60 dB


• Minimum load impedance: 16 ohms


• Maximum headphone output level: 26.4 mW @1% THD


• Minimum load impedance — Camera Output: 2K ohms Maximum room output


• level (Mic adjustment): -26dBV Maximum room output level (in-line adjustment)




• ): -8.3 dBV
  
• Latency at 3.5 mm (without NR): 15.33 ms (within 1 frame @60 fps)


• Latency at 3.5 mm (with NR): 17.33 ms USB latency:


• depends on the device Direct latency to the phone:


• A/V synchronized within 1 frame Range of use:


• about 30 meters in the air line Dimensions single microphone: 46 x 22 x
15

• mm
  
• Single microphone weight: 8.2 g


• Microphone materials: black PC/ABS thermoplastic


• Microphone antenna: copper alloy sheet - nickel and zinc


• Receiver dimensions: 65 x 67 x 19 mm Receiver weight:


• 81 g Receiver antenna: tinned


• steel plate Receiver materials:
black PC/ABS thermoplastic