Celestion CDX1-1730 40W 8ohm HF Neodimio

Celestion - CDX1-1730 40W 8ohm - HF Compression Driver - Neodymium Compression Driver with neodymium
magnet, 1" output, 40Watt power, 8ohm impedance, PETP (polyethylene terephthalate) diaphragm, screw fixing.

Features

- 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminum voice coil

- 40Wrms (AES standard) power handling and 110dB sensitivity

- Designed with Sound Castle™ clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion -
One piece PETP film diaphragm and surround


- Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression

General Specifications
Power rating (1): 40Wrms
Continuous power rating (2): 80W
Nominal impedance: 8ohm
Sensitivity (3): 110dB
Frequency range: 1200-20,000Hz
Recommended min. crossover (12dB/Oct): 2200Hz
Voice coil diameter: 44mm/1.75in Voice coil material: Edgewound copper clad Aluminum Magnet type: Neodymium Diaphragm material: PETP film Surround material:
PETP film

Mounting Information
Maximum width: 88.5mm/3.48in
Minimum width: 82.0mm/3.23in
Depth: 55mm/2.2in
Weight: 0.65kg/1.4lb
Fitting: Flange (4 x M6 holes on 76mm/3in PCD)
Throat exit: 25.4mm/1in Compatible Horns H1-9040P, H1-7050 “No Bell” Note (1) Tested for two hours on

plane wave tube using continuous band-limited

pink noise as for standard AES. Power calculated on minimum impedance.

(2) Continuous Power Handling is defined as 3dB greater than the AES rating.

For an overview of the entire Celestion CDX Neodymium series, click here