A R T SPLITCOMPRO

Microphone Splitter/Combiner (Microphone Divider/Combiner) The ArtCessories SplitCompro is an ideal audio utility for applications where it is necessary to divide a low impedance microphone signal to power two separate mixers, or, on the contrary, it is necessary to combine the balanced low impedance microphone signals of two microphones into a single channel input. Low distortion with wide frequency response. Two functions in a single device: combination and/or division. Phase switch for subtractive combinations. Galvanic isolation to prevent phantom power from passing between channels. Ground Lift to reduce noise due to ground loops. 20Hz-150kHz Frequency Response, ±0.2 dB @ 0 dBu THD (Total Harmonic Distortion); 0.0007% 20Hz-20kHz @ 0 dBu input. Phase response; 10° @ 20Hz-150kHz (ref. 1kHz). Typical Power Source Impedance 150 Ohms. Typical Output Load Impedance 1 kOhm. Dimensions 1.85 H x 4.6 W x 3.5 D (in) 47 H x 117 W x 89 D (mm). Weight.75 lbs /.32 kg .NOTE: All measurements were taken from the isolated Mic output, with the phase switch set to NORM, with a balanced 150 Ohm source connected to the main Mic input, and with a 1 kOhm load connected to the isolated Mic output to simulate a typical real microphone and microphone preamplifier. 0 dBu = 0.775 VRMS.