The Chorusaurus Gen2 is Aguilar's electric bass chorus pedal that combines bucket-brigade analog technology with the precision and flexibility of modern circuits, now with a completely redesigned design. This pedal produces an organic chorus that doesn't compromise low frequencies

AGUILAR CHORUSAURUS GEN2 OVERVIEW

The Chorusaurus Gen2 allows you to control the timbre of the effect thanks to an intuitive four-knob layout. The BLEND control manages the relationship between the clean signal and the effected signal. The RATE, INTENSITY and Width controls allow you to deeply sculpt your tone. The most representative effect is obtained when the BLEND knob is positioned at 12:00 and the ratio between clean and effected signal is 50:50. By moving the knob completely counterclockwise, the ratio will be 90:10 in favor of the clean signal, while turning it completely clockwise the mix is inverted, favoring the modulated 10:90 signal. With the RATE control it is possible to manage the modulation speed, while with the INTENSITY knob you control the intensity of the effect: the greater the intensity, the greater the drama of the Chorus. With the WIDTH control it is possible to set the interval within which the chorus will act: turning the knob clockwise will expand the range, for a more intense

STRENGTHS OF THE AGUILAR CHORUSAURUS GEN2

AGUILAR CHORUSAURUS GEN2 Blend CONTROLS

: adjust the mix between the effected signal and the clean signal;
Rate: adjust the modulation speed;
Intensity: controls the intensity of the modulation;
Width: sets the range in which the

AGUILAR CHORUSAURUS V2 TECHNICAL SPECIFICATIONS

Input: 1x 1/4" jack

Output: 1x 1/4" jack; you can use it in stereo with two amplifiers using a Y-cable with a 1/4" TRS and two 1/4" TS jacks
Current
consumption: 12 mA Input impedance:
1 mOhm (active effect)
Output
impedance:
1 kOhm Power supply: a 9-volt battery or external 9-volt DC

power supply ( not included)