Fulltrap
- Broadband bass trap
- High performance, wall
mount Suspended diaphragm absorbs bass under 50Hz
High-density - front absorber controls highs
- and mids
Ideal for small rooms with acoustic problems
Primacoustic FullTrap is a high-efficiency - bass trap that combines a diaphragmatic resonator, a standard-sized acoustic
panel, and an enclosure sealed to ensure 3-way absorption across the entire frequency spectrum
.This unique design is comprised of a 24” x 48” - 3” thick, front-mounted Broadway panel made of 6 lb per cubic foot high density fiberglass. This effectively absorbs frequencies up to 125Hz and extends below 100Hz. Behind the panel, an enclosed airspace takes full advantage of the principles of a quarter of the wavelength to further strengthen the absorption of low frequencies in this critical frequency region
.Where FullTrap really stands out is in its ability to absorb deep bass. The remarkable low frequency extension of this panel is achieved through a suspended diaphragm that extends almost the entire height of the device, and it essentially behaves like a huge microphone, vibrating where the low frequencies are most prominent and then capturing them. When room modes combine, reinforcing or canceling certain frequencies; FullTrap's inert mass structure naturally migrates to the most obvious frequencies where it resonates silently to remove
excess bass and subsequent modal frequencies.Available in black, beige or gray, FullTrap can be assembled in a few minutes using common standard household tools. This panel is the perfect solution for capturing bass in environments where corner mounting is not feasible due to windows, doors, or other obstacles. FullTrap can also be used to reinforce other traps when a room requires additional bass control. Combined with Primacoustic Broadway panels and speakers, it can transform virtually any room into a well-balanced acoustic space
.Depth = cm.20.32; dimensions = cm.61x 121.92; beveled edge; Cover = mq.0.74384; Pack of 1 pc. Gray color.
Z840-1100-08