Quik Lok SP/282 BK Coppia di stativi per casse acustiche

Quik Lok SP/282 BK

The Quik Lok SP/282 BK loudspeaker stands are able to lift a speaker with minimum effort thanks to the innovative “Easy-Lift” height

To assemble the boxes, you must carefully follow the following instructions:

1. First you have to place the case in the support with the vertical tube at the minimum height and start lifting the 35 mm vertical tube to reach the desired height
.

2. The steel safety pin, placed inside the height adjustment mechanism, will automatically be inserted into the appropriate seats located 10 cm from each other, in order to block the tube every 10 cm and thus allowing the user to lift the case gradually and effortlessly.


3. When you reach the desired height, screw in the knob for greater safety and eliminate “play” between the mechanism and the tube when climbing.


4. To make the case go down, it is necessary to first press the lever that will unlock the internal safety pin, then very carefully loosen the locking knob, until you see the case descend gently to the minimum height of the support.


5. Be careful to loosen the knob too much or too quickly because the case could fall too fast and, in addition to the possibility of being damaged, it could hit the user.

Quik Lok SP/282 BK is able to support a maximum load of 56.6 kg and has a weight of 2.7 kg. It has a very sturdy and light construction so as to facilitate its portability

Included with the speaker stand you will find a mounting adapter with a 38 mm hole.