MST/001 is the multifunctional table support developed by Quik Lok to allow maximum adjustment versatility in the smallest possible space.

Thanks to the large top plate 25 cm wide and 29 cm deep, you can use this support to position your nearfield monitors on the work surface at the height and angle that best suits your needs; the front part of the shelf is folded with a 1 cm flange which, in the event of an angle of the table, prevents the equipment from slipping thanks to the convenient 23 cm x 6 cm adhesive rubber strips supplied.

At the same time, MST 001 is also convenient for comfortably placing devices such as mixers, tablets or small midi controllers.

The base 25 cm wide and 30 cm deep is equipped with four feet in the corners that are adjustable in height thanks to a screw system that allows a rise from a minimum of 1 cm to a maximum of 2 cm in order to compensate for any differences in height.

The upper plate is equipped with a joint at the base that allows angles from 0° to 90° in order to obtain the right directionality of the monitors when raised, or the correct angle of a mixer or MIDI controller for easy use.

MST001 is adjustable in height by loosening the screw with Quik Lok's “Q” feature, placing the locking pin in one of the five holes on the tube that is inserted into the base and finally tightening the knob. Through this procedure, different heights can be obtained: from a minimum of 29 cm from the top to a maximum of 37 cm, with increments of 2 cm for intermediate positions (29, 31, 33, 35 cm).

SPECIFICATIONS OF QUIK LOK MST/001 MULTIFUNCTIONAL STAND

Material: Steel Finish: