Spedizione con Corriere Espresso (24/48 ore) e tracciabile
Reso facile e veloce. Hai fino a 14 giorni per ripensarci.
Hai bisogno di aiuto? Contattaci subito. Clicca qui oppure chiama al (+39) 02 8395060.
Caratteristiche
- 8" mid-range loudspeaker provides 99dB sensitivity and 100Wrms (AES standard) power handling
- 1.75" high temperature copper voice coil wound on polyimide former for increased reliability
- Designed for use in large 3-way systems
- Closed back chassis simplifies cabinet manufacture, eliminating need for separate mid-range enclosure
Specifiche Generali
Nominal diameter: 203mm/8in
Power rating(1): 100Wrms
Continuous power rating(2): 200W
EIA power rating(3): 150W
Nominal impedance: 8ohm
Sensitivity(4): 99dB
Frequency range: 800-5000Hz
Voice coil diameter: 45mm/1.75in
Chassis type: Pressed steel
Magnet type: Ferrite
Magnet weight: 0.57kg/20oz
Coil material: Round copper
Former material: Polyimide
Cone material: Kevlar loaded paper
Surround material: Treated paper
Suspension: Single
Parametri di Thiele-Small
Fs: 450Hz
Qts: 6.70ohm
Le (at 1kHz): 0.34mH
Informazioni di Montaggio
Overall diameter: 208mm/8.19in
Overall depth: 85mm/3.35in
Cut-out diameter: 183mm/7.20in
Mounting slot dimensions: 9.5mm x 5.5mm/0.37in x 0.22in
Number of mounting slots: 4
Mounting PCD range: 195-199mm/7.68-7.83in
Unit weight: 1.9kg/4.2lb
Note
(1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Continuous Power Handling is defined as 3dB greater than the AES rating.
(3)Tested as per the EIA-426-A standard.
(4)Measured on axis at 1W, 1m in 2pi anechoic environment.
Per stampare la scheda prodotto, clicca qui
Per una panoramica su tutta la serie Celestion TF Ferrite, clicca qui
Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui
Caratteristiche
- 8" mid-range loudspeaker provides 99dB sensitivity and 100Wrms (AES standard) power handling
- 1.75" high temperature copper voice coil wound on polyimide former for increased reliability
- Designed for use in large 3-way systems
- Closed back chassis simplifies cabinet manufacture, eliminating need for separate mid-range enclosure
Specifiche Generali
Nominal diameter: 203mm/8in
Power rating(1): 100Wrms
Continuous power rating(2): 200W
EIA power rating(3): 150W
Nominal impedance: 8ohm
Sensitivity(4): 99dB
Frequency range: 800-5000Hz
Voice coil diameter: 45mm/1.75in
Chassis type: Pressed steel
Magnet type: Ferrite
Magnet weight: 0.57kg/20oz
Coil material: Round copper
Former material: Polyimide
Cone material: Kevlar loaded paper
Surround material: Treated paper
Suspension: Single
Parametri di Thiele-Small
Fs: 450Hz
Qts: 6.70ohm
Le (at 1kHz): 0.34mH
Informazioni di Montaggio
Overall diameter: 208mm/8.19in
Overall depth: 85mm/3.35in
Cut-out diameter: 183mm/7.20in
Mounting slot dimensions: 9.5mm x 5.5mm/0.37in x 0.22in
Number of mounting slots: 4
Mounting PCD range: 195-199mm/7.68-7.83in
Unit weight: 1.9kg/4.2lb
Note
(1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Continuous Power Handling is defined as 3dB greater than the AES rating.
(3)Tested as per the EIA-426-A standard.
(4)Measured on axis at 1W, 1m in 2pi anechoic environment.
Per stampare la scheda prodotto, clicca qui
Per una panoramica su tutta la serie Celestion TF Ferrite, clicca qui
Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui
Italiano
English
