Spedizione con Corriere Espresso (24/48 ore) e tracciabile
Reso facile e veloce. Hai fino a 14 giorni per ripensarci.
Hai bisogno di aiuto? Contattaci subito. Clicca qui oppure chiama al (+39) 02 8395060.
TEAC has introduced the TN-200 – a great-sounding belt-drive turntable for music fans who want to enjoy the full range of vinyl classics and reissues.
The TN-200 includes a built-in preamp providing line outs and a USB out for connection to almost any sound system. The USB output can be used with recording software to archive your vinyl collection or add it to your mobile playlist.
The belt drive motor on the TN-200 reduces vibration for sweeter, more accurate sound than DJ direct-drive turntables. An aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static balanced straight tone arm ensures clean playback. It’s all housed in a handsome case with a flat black finish to fit any décor.
For music enthusiasts who want to hear every sensuous note of their vinyl collection, there’s no better player than TEAC’s TN-200.
| Turntable section | |
| Drive System | Belt Drive |
| Motor | DC Motor |
| Speed | 33 1/3 RPM, 45 RPM |
| Rotation Speed Variation | +/–2% |
| Wow and Flutters | 0.2% |
| Signal-to-Noise Ratio | 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) |
| Platter | Aluminum Die-cast |
| Diameter of Platter | 12", 30cm |
Tonearm section | |
| Type | Static Balance, Straight |
| Effective Arm Length | 8.8", 223mm |
| Stylus Pressure Range | 0 to 5g |
| Supported Cartridge Weight | 3.5 to 6.5g |
| Anti-skating Adjustment | Supported |
Cartridge section | |
| Type | MM type |
| Stylus Shape | Elliptical |
| Stylus Construction | Bonded Round Shank |
| Mount | Half inch |
| Frequency Response | 20Hz to 20kHz |
| Channel Separation | 20dB at 1kHz |
| Channel Balance | 2.0dB |
| Tracking Force | 1.5 to 2.5g |
| Vertical Tracking Angle | 20 degrees |
| Supported Load Impedance | 47k ohms |
| Output Voltage | 4.5mV +/-3dB |
| Stylus Pressure | 2.0g +/–0.5g |
| Cartridge Weight | 5.7g +/–0.5g |
| Head-shell Weight | 10g (including Screws, Nuts and Wires) |
| Replacement Stylus | audio-technica ATN95E (sold seperately) |
Phono Equalizer Amplifier | |
| Type of Amplifier | MM type (On/Thru switchable) |
| Analog Output | |
| Connector | RCA Pin jack (Gold-plated) |
| Output Voltage | Phono/Line switchable |
| Phono Output | 4.5mV +/–3dB |
| Line Output | 120mV (–13dBV) |
| USB Output section | |
| Connector | USB B type |
| Output Signal | PCM 48kHz/16-bit |
| Supported OS | Windows 7 Windows 8 Windows 8.1 Windows 10 OS X Lion (10.7) OS X Mountain Lion (10.8) OS X Mavericks (10.9) OS X Yosemite (10.10) OS X El Capitan (10.11) macOS Sierra (10.12) |
| Power | AC 100 to 240V, 50/60Hz |
| Power Consumption | 1.5W (less than 0.5W at Standby) |
| Overall Dimensions (W x H x D) | 16.5" x 4.6" x 14.0" 420 x 117 x 356 mm |
| Weight | Approx. 10.8 lbs. 4.9 kg |
| Accessories | Rubber Sheet, EP Adapter, Counter Weight, Head-shell (TEAC MM cartridge), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card) |
Italiano
English
